HOT WATER STORAGE (FPC Pressurized -300Lpd)
| Technical Specifications | Detailed Description |
|---|---|
| Tank Design | Steel Tank with Deep Drawn End Dish as per Indian Boiler Code Design Standards |
| Tank Capacity Excluding Tubes (Excluding the tube Volume) | 301 liters |
| Tank Material | MS |
| Tank Wall thickness ( Shell & Dish) | 3 mm & 3 mm |
| Tank Primary Corrosion Protection Coating | 3 Layer High Build Ceramic Filled Food Grade Epoxy Coating |
| Tank Secondary Corrosion Protection | Magnesium Alloy / Aluminum Alloy based self Sacrificial Anode System |
| Resistance to Corrosion against Hard water ( PPM ) | Upto 600 PPM |
| Maintenance Doors on the Tank Dish ends | Yes |
| Outer Tank Cladding | Galvanized Steel Pure Polyester UV Resistant Power Coating |
| Pipe Termination | Stainless Steel - SS- 304 Grade |
| Back Up Electrical Booster | Suitable Electrical Booster Fixing Provision Built in the Tank |
| Insulated Tank size | 580 mm Diameter x 1836 mm Long |
| Area Required to install ( Approx) | 9 Sqr M |
SOLAR WATER COLLECTOR (FPC Pressurized -300Lpd)
| Technical Specifications | Detailed Description |
|---|---|
| Collector Size | 2035 x 1035 x 95 |
| Collector Absorber Area | 2.02 square Meter |
| Collector Absorber Material | High Quality Electrolitic Copper Riser Pipe12.7 mm Diameter & Copper Fin |
| Collector Absorber Coating | " NALSUN " Selective Coating - Absorbtivity > 0.90 & Emmisivity < 0.20 |
| Number of absorber fins | 9 Fins Per collector |
| Collector Box Material | Corrosion Resistant Extruded Aluminium Profile with Stainless Steel Fasteners , Pure Polyster Powder Coated |
| Collector Glazing | High Transmissivity - Textured Solar Glass - 3.2 mm Thick Toughened Glass - Transmissivity > 80% |
| Collector Insulation | Rock wool insulation - 40 mm Bottom & 20 mm Sides |
| Header pipe | 25.4mm High Quality Electrolitic Copper |
| Collector Back Sheet | Cold Rolled Corrosion Resistant Aluminium Sheet |
| Number of collectors per System | 3 |
| Grommet & Gaskets | EPDM |
| Working Pressure | 3 Kg / Sq cm |
STRUCTURE DETAILS (FPC Pressurized -300Lpd)
| Technical Specifications | Detailed Description |
|---|---|
| Structure Material | Steel Angle to ISI Specification |
| Structure Design | Modular Design Steel Angle with Mig Welding |
| Corrosion Protection | Pure Polyester UV Resistant Power Coating |
